Load Image for Navigation Tools
CONTENTS
Revisiting the 1993 Reconfiguration Study
Program for Reconfiguration
Choices

Drawings (configuration by Jonathan Christman)
Plan view of existing space
Plan of the 1993 Proposal
Plan view of proposed 2000 configuration
Section through center
Section through side seating units

Computer Visualizations
(prepared by Walter, Robbs, Callahan & Pierce: Architects)

Entry into the Ring
From top row- viewing performance area
From stage- center seating unit
Audience Crossover
Model Display Area-- installed in center seating section
From booth- stage area

(symbol is an active link to the plate or illustration)

RECONFIGURATION OF THE RING SPACE 
1993 Study
to view
1993 Study
In 1993, the we proposed a reconfiguration of the Ring Theater.  That proposal was for a more ambitious renovation of the Theater / lobby and entrance to the building.  This proposal featured a second level entry and walkway for the audience. 

 

2000 Renovation As the original surface treatments in the theater have become thread bare over the past few years, a renovation of the space is required.  While the capital resources were not available for the scope of renovation that we envisioned, I revisited that plan to consider alternate configurations for the space.  The choices were to keep the project to be manageable both in time and money.
 
Original Program for Reconfiguration • The space must be a "finished" space. The space must be ready for a public presentation at any time with little or no preparation.

• The number of seats should remain approximately the same.

• A large open area must remain for class use, of at least the size of the present acting area.

• To provide a structure for a more fully produced production requiring minimal scenic material.

• Limited flexibility

    a student project (directing, acting, design) should not be faced with a plethora of choices in mounting a production. 

    for presentations and lectures there should be a standard configuration which will maximize audience seating and focus.

• To maintain a intimate performance space.

• To provide the student directors, actors and designers a theatrical configuration and structure that approximates theaters that they will encounter upon graduation.

• To create discreet audience and backstage areas.

• Increased backstage space provides accessible storage for classroom properties and equipment hidden and not intruding into the audience areas.

• Audience access to the Scales Fine Arts Center. 

The majority of events happen at night, and the changes to the campus traffic plan mean the majority of the off campus visitors come from the direction of parking lot Q. From this approach there is no defined entrance to the building, particularly at night. People tend to use the closest entrance stairwell rather than an entry, down 4 steps, and through a dark stairwell before entering the lobby. From this point there are additional stairs to down to the Ring Theater or up two more to lobby levels. This is a problem for handicapped patrons as well as less than desirable from an aesthetic consideration.
 

Additional Concerns: Lighting- A concern expressed by the Performance Faculty that is the low level of lighting available for teaching in the space.  This concern would be intensified once the projection screen is removed.

Fire Exits- The fire marshall in his recent visits to the space has expressed concern about various pod configurations and the proximity of the opening in the pods to the exits of the space.  In addition, concern for the shared "backstage" and exit space has been expressed.

Hamlet Project- This project proposed by James Dodding would be enhanced by the reconfiguration of the Ring space.  This project would feature one of the proposed uses of the space, an incorporated Elizabethan unit set.

Storage / Display space- The conversion of the scene design studio to a digital lab has created a need to find a space to store models. 
 

Plan Comparison: 

a) existing

b) 1993 
proposal

c) 2000 plan
(click on plan to enlarge)

Existing Ring
1993 Proposal
2000 Plan
Configuration: The scaled back proposal for the ring essentially reconfigures the pods from a circular arrangement to a configuration based on the 1993 proposal.
The access aisles have been expanded to minimize the tunnel effect for the audience.  The net effect is that there are fewer seats and smaller stage space.

This plan does not solve the audience and actors sharing the same spaces as the patrons still must cross stage area  to reach their seats.  The vomitory entries may not use scenery as they are the principle method of audience egress.
 

Stage Configuration: The stage space that remains is approximately a 25 foot square, with actor access from the vomitory on the downstage corners, at the ends of the side sections of audience, or through the set. The rectilinear shape is considerably more useful space for creating a set with architectural integrity than the present circular shape.
 
Orientation:
The theater is now oriented to with the stage facing the West wall.  This puts the double doors of the scene shop to the backstage area. 

View
The audience entry from the lobby is aligned with the vomitory to the stage space.  The other vomitory aligns with the emergency exit.  In this configuration the traps are also in alignment with the stage area.
 

Features:
A structure creates a backing for the performer, the choice of these walls is reminiscent of a proscenium though the performers will be in front of this structure.  The choice of materials for this is stained wood that would be similar to the interior finish of the Mainstage theater which would maintain continue the buildings vocabulary.  This structure will also reflect the performers voices.
Backstage: The backing structure creates a permanent backing wall and divides backstage from the rest of the theater.  There is a door on each side allowing access to the backstage areas.  Performers may use the audience access spaces to reach the voms using the side door of the ring theater.
 
Panels: A system of tracked fabric covered panels allow the backstage space to be closed off for meetings and other events that demand a finished look.
 
Seating:
At this point we will continue to use the existing chairs for the Ring Theater.

Seating Area will be finished in carpet to make the space similar in rehearsal and performance.

Row Width:
The width of aisles will be increased from the existing 33 inches to 38 inches.
 

 

Display Space:
The interior space of the pod creates a opportunity to created a lit display space for models and other design & production relics.
Audience Passage:

Wall sconces supplemented with a low level light trough light the audience passage behind the seating units.

The wall spaces may be used for flat display.


 
Comparison:
Existing Ring
1993 Proposal
2000 Plan
Number of seats
124
132
119
Additional seats
0
24
9
Stage Area
531 sq. feet
880 sq. feet
760
Audience
1353**
550 sq. feet
680
Backstage Area
1353**
920
240

** Indicates space shared by performers and audience
 

Control Booth:
The existing control booth is not in an ideal location for the projected stage space. 
In the ideal, the booth would be relocated so the stage manager and crew would have an unobstructed view of the stage and the booth would not be in the visual sphere of the audience.  It is not feasible to contemplate relocation of the booth with present funds.

 
Multimedia 
Capability:
A projection screen will be located in the structure of the backing which may be lowered to create a projection surface.
At this time, there are no funds for wiring or multi-media equipment.
 
Front of House The Front of House aspect of the original program is not addressed in this renovation.
 
Plan:
 
 
Section Through Center:
 
Section:

hompage compiled by Jonathan Christman (3/9/2000) Access count: 2,707